home *** CD-ROM | disk | FTP | other *** search
- Trax On Line.
- Trax Toolbox
- Volume 003
-
- ||||||| ||||||| ||||||| \\\ /// Introduction. This file brings together
- ||| ||| ||| ||| ||| \\|// several interesting phone projects that
- ||| |||\\ ||||||| \|/ could be useful in one way or another.
- ||| |||\\\ ||| ||| /|\
- ||| ||| \\\ ||| ||| //|\\
- ||| ||| \\\||| ||| /// \\\
- -------------------------------------------------------------------------------
- Telephone Tap (Automatic)
- 1. Parts List
- Resistors Capacitors Semiconductors
- 1-150R 1-2N2 Greencap 5-1N 4148 Diodes
- 1-470R 1-4N7 Greencap 2-BC 547 Transistors
- 1-3K3 2-10N Greencap 1-BC 557 Transistor
- 3-4K7 2-22N Greencap 1-BC 338 Transistor
- 1-8K2 1-47U 16V Electrolytic
- 2-10K
- 1-47K
- 1-1M
-
- Misc Components
- 1-Spdt toggle switch
- 1-Dpdt slide switch
- 1-2.5mm plug (For the Remote Socket)
- 1-3.5mm plug (For the Mike Socket)
- 2-Alligator Clips (To the Phone Line)
- 1-AA cell
- 2-Length of hookup wire 15cm (One for each Alligator Clip)
- 2-length of "fig 8" cable 50 cm (One for each Plug)
- 1-5cm length of tinned copper wire (Solder to Battery to hold onto PCB)
- 2. Circuit
-
- *----------+--------22N---+---4K7---+---8K2---+---*
- PHONE LINE | 4N7 2N2 470R MIKE SOCKET
- *---+------|--------22N---+---------+---------+---*
- | |
- | 1M +------+------+-------+-------+ +VE
- | | 10K 10K 47U | --- 1.5 volts
- | /|\ | | | E - SWITCHES
- | k | a | E--4K7------B 557 | SPDT
- | D | D E---B 547 | C \+---+ DPDT
- | +-+ 10N +---+---+--4K7--B 547 C | | | | --+--R
- | | D | D | | C | | 150R +--+----+/ | E
- | | k | a 10N 47K | | | | C k | | | M
- | | \|/ | | +------+ | +----B 338 D | +----O
- | | | | | 3K3 | E | | | | T
- | +----|------+---+-----------------+------+---------------+--+--+-+/ | E
- +------+ --+
- 3. Set Up
-
- _____ Tape Recorder
- (-----) ________
- / (0) \ Phone *---Terminal 2----|---------| |________|
- -------=============[[= |Phone Tap| |_|_|_|_||
- Wall *---Terminal 6----|---------| ||(0 0)||
- Plug || || ||______||
- || || | |
- || ||2.5mm plug| |
- (======||=======(==|Remote |
- (========(==|Mike |
- 3.5mm plug|________|
-
- 4. Notes
- D=Diodes 1N 4148 k=cathode a=anode (On circuit diagram)
- E=emitter C=collector B=base (Transistors)
- The set up of the tap is to a tape recorder. When the phone is being used the
- tap switches on the tape recorder via the remote plug picking up the sound via
- the mike socket. It is illegel to tap someone elses phone but not your own.
- -------------------------------------------------------------------------------
- Wireless Tap.
- 1. Parts List
- Resistors Capacitors Semiconductors
- 1-100R 1-10P Ceramic 1-BC 547 Transistor
- 1-390R 3-47P Ceramic 1-2N 3563 Transistor
- 1-1K 1-1N Ceramic
- 1-10K 2-22N Ceramic
- 1-47K 2-33N Ceramic
- 1-150K 1-100N Mono Block
-
- Misc Components
- 2-AAA cells
- 1-SPDT slide switch
- 2-Alligator clips
- 1-6 turns tinned copper wire .61mm
- 1-6 turns enamelled wire .5mm
- 2 metre hook-up wire for antenna
- 2. Circuit
- SWITCH
-
- +-----+-------+---100R------+------+-----+- \---+
- | | | | | | |
- | | +--+--+ | +--+--+ | |
- | | | 6 ) | | 6 ) | ---3
- 47K | |TURNS)+--+ 120K |TURNS) | - V
- | 22N |.61mm) | or |.51mm) | ---O
- | | 47P ) | 150K 47P ) 22N - L
- | | |.3mm ) | | |.3mm ) | | T
- *---33N---10K---+---100N---+--+ | | dia ) | | | dia ) | | S
- | | | | +--+--+ +--47P-+ +--+--+ | |
- PHONE LINE 1K 1N +------+ | | | | |
- | | | | +---+ | +ANTENNA 2 METRE
- *---33N---------+----------+-----+ | | | | C | |
- | | C 10P +B 2N 3563 | |
- | +B 547 | E | |
- | E | +-------------+-----+------+
- | +---+ |
- | 390R |
- +-------+------+
-
- 3. Set up
-
- FM Radio .
- \ |
- _____ Phone ______|
- (-----) |) | | Tuned
- / (0) \ *---Terminal 2---|------------|/\/\/\/\|------| to about
- -------=============[[= |Wireless Tap|/\/\/\/\| ____ | 100 Mhz.
- Wall Plug *---Terminal 6---|------------|/\/\/\/\|(____)|
- / |______|
- Radio
- 4. Notes Waves
- B=base E=emitter C=collector (Transistor)
- The pick up frequency is roughfuly about 100 MHz on your FM Radio. Cutting
- the length of the Antenna will reduce the transmit distance which can vary from
- 200-400 metres.It is illegal to have a bug shorter than 30cm, so don't cut the
- antenna any shorter than that and illegal to tap anyone else's apart from your
- own phone.
- -------------------------------------------------------------------------------
- Two Line Phone Set Ups.
- _____
- (-----) 3 Way Phone. Connect Terminal 2 together on both
- / (0) \ phones and Terminal 6 on both phones. A 3 way
- -------===============) switch on Terminal 6 can help isolate phones.
- _____ || || EG. Phone 1----=----Terminal 2
- (-----) || || Terminal 6----=----Phone 2
- / (0) \ (=====*|==*=========*=================]]======= Phone 1
- -------=====================*==|*========|*================]]======= Phone 2
- || ||
- || ||
- Network Emulator. Requires a ||
- computer with 2 RS232 ports and 2 Divert Calls. Requires at least one
- modems. Phone 1 is rang letting tone line ,Telephone Tap and Cheap
- user access a mailbox type system Phone. Connect the Phone leads on the
- while on the system a Network Tap to Phone 1. Connect the Mike
- link to say Austpac will be shown PLug to the Voice Mike on the Cheap
- on the User Menu. Picking this Phone. Connect the Remote Plug of
- option the user is dialed out to the Tap to the Hang-Up switch on the
- Austpac via Phone 2. (How good an Cheap Phone. (There are 3 wires here
- Emulator can you get expect the so you may need to experiment so that
- real thing!) All this data is the second Phone hangs up when the
- buffered to harddrive. Picking up first one does.) Connect the Cheap
- NUI, NUA's, system user name and Phone Plug to Phone 2. The results
- password. being that when Phone 1 is rang Phone
- EG. 2 will un-hang allowing you if this
- _______ line is tone to dial out.
- |-------| EG._____
- |Remote | (-----) Remote Phone.
- |User | / (0) \ _____
- |-------| -------===========) (-----) Phone 1.
- ------- Exch. || / (0) \
- /_______\==|Modem|===[[=////=]] _____ (==-------======)
- || |Cheap| Phone Leads||
- || |Phone| Mike Plug \||
- _______ || | 123 |Voice ______|_____|TAP|====)
- |-------| || | 456 |Mike / |
- |Network| Phone 1 || | 789 |______/ Remote |
- |System | \ || | *0# | Plug -- |
- |-------| /==|Modem|=====) |_____|______________________|
- ------- // || Hang-Up Switch
- (====/_______\=/ ||
- || ^ (=====) _____
- || Network and Mail Box Type As || (-----) Phone 2.
- || Operation System. Ext. || / (0) \ Dial Out -->
- (===|Modem|====[[= Dial Out to (==-------=========[[=
- Phone 2____^ Austpac etc.
- -------------------------------------------------------------------------------
- End Zone.
- Well thats all. The Phone is a really powerful tool if you know how to use it
- properaly. I decided that there was a need for a hardware type file with
- pictures because it's alot more helpful in getting my ideas across. Hopefully
- the ideas i've presented have given you more of your own. Also pictures are the
- only concept that fag Zero Hour can understand.
- Trax Off Line.
- -------------------------------------------------------------------------------
- á û